background image

clearly written on the outside of the return package. A brief description 
of the problem as well as the R.A. number must also be written down 
on a piece of paper included in the shipping carton. If the unit is under 
warranty, you must provide a copy of your proof of purchase invoice. 
You may obtain an R.A. number by contacting our customer support 
team through our customer support number. All packages returned to 
the service department not displaying a R.A. number on the outside of 
the package will be returned to the shipper.

       

 

Safety 

Precautions

Ultraviolet Radiation Warning 

(F8-B Only):

The F8-B (blacklight) fixture contains a high intensity led ultraviolet 
emitter which is concentrated with a fresnel lens. When this fixture is 
used in accordance with the manufacturers operating instructions, no 
hazards exist to most people standing within the beam of the fixture. 
However, individuals suffering from a range of sunlight exposure 
disorders, aphakic and pseudoaphikic, or those individuals receiving 
photosensitive medication may receive discomfort if exposed to 
ultraviolet light.  For reflective, not direct use.  Avoid too frequent or too 
lengthy exposure.  Exposure can cause eye and skin injury and allergic 
reactions. Repeated exposure may cause chronic sun damage and 
skin cancer.  Do not look directly into the fixture while in operation.  
Wear protective eyewear.  Failure to use protective eyewear may result 
in severe burns or long-term injury to the eyes.    

IP Rating (All F8s):

The F8 is rated IP54 for weather resistance: Ingress of dust is not 
entirely prevented, but it will not interfere with satisfactory operation. 
Splashing water or light rain or snow will also have no harmful effect. 
While the F8 is protected against light moisture and dust exposure, 
please protect the instrument when shooting in extreme conditions and 
note that the instrument is not rated to be submerged in water, or 
exposed to prolonged periods of moisture. Always use your best 
judgment and protect the instrument from sustained moisture 
exposure.
    
   
    

Page 3

Summary of Contents for F8-100





















Reviews: