IP Audio Dispatch APP User Guide | ZYCOO Co., Ltd.
10
Press-to-Talk
Press-to-Talk Number: This setting represents the number will be dialed by using Key.
Line:
Line represents the line that will be using to dial the call.
Press Again to End Call: Enable/Disable. If this setting is enabled, then press the key twice will
end the call when it’s in process.
Input Settings
Per the specification if the sensor, select from “Falling Edge” or “Rising Edge” as the trigger, and then setup
the number to dial, so, when the sensor sends the corresponding digital level signal to the SIP paging gateway
device, it will dial the given number.
o
Input Detection:
Enable/Disable, enable this option to detect any digital level signals.
o
Trigger Mode:
There are “Falling Edge” and “Rising Edge” options for the trigger.
o
Dial Number:
Enable/Disable, enable this option if you need to dial a number when the
corresponding digital signal is received.
o
Number:
The number that need to dial
o
Line:
Line represents the line that will be using to dial the call.
TriggerSettings
To use digital level input signal as the trigger of dry contact relay output, please enable “Trigger by Input
Signal”.
To use DTMF signal as the trigger of dry contact relay output, then please specify the DTMF key press.