Network Speaker User Guide | ZYCOO Co., Ltd.
1
Overview
Product Overview
Ei Series Safety Intercom is available in four models designed to address the needs and requirements of
various applications and installation types. All models deliver full-duplex communication and secure access
control for your VoIP system.
Ei Series is PoE/PoE+ supported, making it easy to connect to the local area networks from your PoE switch
with a CAT 5/6 cable. No extra power supply is required.
Each model has been equipped with one or more programmable dial buttons, and any desired number can be
preconfigured. Users can talk with the target number in hands-free mode by pressing the button.
All models are equipped with digital level input for the connection of sensors and relay switch that can be used
to connect a door magnet or alarm light. The action (open/close the door) of the relay switch can be controlled
by the DTMF signal, intercom call status, sensor input signal, and audio-out option to connect with an active
speaker or power amplifier for sound expansion.
In addition to working with ZYCOO IP Audio Center, all Ei Series Network Safety Intercoms can be connected
with external IP cameras for video linkage purposes.
Product Specifications
Speaker Components:
Φ40 full frequency drive unit
Sensitivity:
96±3dB
Distortion:
<1%
Rated Power:
8Ω 5W
Amplifier:
Single Channel Class-D
Frequency Range:
100Hz~20KHz
Acoustics:
Mono
Microphone:
-36±2dB
Hand-wave detection:
8cm
Video Resolution (IV03):
1920*1080@20fps, 1280*720@25fps
