Ref.No.
：
102021
Installation Instruction
1.
You can put ZGW01 on the table or hang it on the wall.
2.
Choose a suitable location to install ZGW01, please note the following when hanging it on the wall.
*Note: Mounting height should be
≤
2 Meter above ground.
(1). Use double-sided foam pad (Figure 1)
(a) Wipe wall with rubbing alcohol, allow it fully dry for at least 1 minute.
(b) Please take out double-sided foam pad from the package, remove a liner and then press adhesive
to the back of the magnetic base
○
5
.
(c) Remove another liner, and press the magnetic base firmly to wall for 30 seconds.
(d) Attach the device to the magnetic base
○
5
.
(2). Fix the screws (Figure 1)
(a) Remove the magnetic base cover
○
6
by turning it forward (Figure 2) and choose a suitable location
to install the magnetic base cover; then fix the two screws to the wall. (Screw size: M3, diameter of
wallboard nail is 3mm. Not included in this package.)
(b) Put the magnetic base
○
5
on magnetic base cover and turn it clockwise to close.
(c) Attach the device to the magnetic base
○
5
.
Weight & Dimension
Weight: 110g
Dimensions: 3.1 inches*3.1 inches *2.2 inches (79mm*79mm*55.8mm)
Fault Codes & Troubleshooting Guide
This section includes a list of Frequently Asked Questions for problems you may encounter with the ZGW01 CO
2
monitor.
Fault Icon
Description of The Fault
Suggested Action
This device of CO
2
measurement abnormality. The display
is fixed at 9999 and cannot be recovered; the calibration
data has been destroyed.
Please contact the Distributor for further assistance.
Package Contents
Mini 3 IN 1 CO
2
Monitor
Manual
USB cable
Radiant Innovation Inc. Http://www.ZyAura.com
1F, No.3, Industrial East 9
th
Road, Science-Based Industrial Park, HsinChu, Taiwan 300.
(Figure 1)
(Figure 2)
