ＳＩＮＧＬＥ ＤＯＵＢＬＥ
Ｐ
Ｏ
Ｌ
Ａ
Ｒ
Ｉ
Ｔ
Ｙ
Ｅ
Ｌ
Ｅ
Ｃ
Ｔ
．
Ｅ
Ｙ
Ｅ
＋
－
ＡＵＴＯ
ＨＡＮＤ
ＷＯＲＫ
ＳＰＥＥＤ
１
３
５
１４
１３
１３
１２
１２
６
１０
１０
１１
７
９
８
２
４
R
One. Product resume:
The controller can do automatic correct with thin film, paper...etc.
after printing when it matches synchronous motor, photoelectric eye and
ball bearing. Its control panel adopts micro-touch switch and its control
circuit adopts chip microcomputer to intelligent control. The controller
can selects single/double photoelectric eye to control. It can establish
response speed of the synchronous motor for cancel phenomenon of noise
and jarring excessive when we adopts single photoelectric eye to work.
Another increment circumscribe direction and appearance connecting
which makes more conveniently for correct operating.
Two
，
Sketch map of front
－
panel
and
switch
：
GK-61 Automatic Photoelectric-correct Controller
P1
Three. The control parts of the correct controller
(define with number 1-14 of the above scheme):
1. Inching button: Press them can make synchronous motor
turning forward or backward whenever the controller works
on auto or hand operation.
2. Switch for selecting photoelectric eye: Press it can select single
or double photoelectric eyes to work. Generally single eye is
used to track printing ray and edge of materials, but double eyes
is mainly used to track symmetry printing pattern(see diagram
below).
3. Indicator for selecting photoelectric eye: Indicate photoelectric
eye to choose in single or double appearance respectively.
