Zwilling ENFINIGY 53000, Operating Instructions Manual

Page: 28 / 144

28
GB
Problem Possible cause Remedy
Liquid runs out of the blender
bowl.
The blender lid, the lid closure
or both parts are not attached
correctly.
Attach the blender lid correctly
and seal it with the lid closure.
The seal of the blender lid is
broken. The seal must be exchanged by
customer service.
The blender bowl is overfilled.
Reduce the number of ingredients
or the quantity.
A program symbol, the dis-
play and the power button
are flashing. An automatic program has
been interrupted. The flashing
indicates the interruption.
Press the power button again to
continue the automatic program.
All program symbols and the
display on the blender base
are flashing and three beeps
sound.
The blender bowl and the lid
have been removed during
operation.
Reattach the blender bowl or lid
and continue as desired.
The motor has overheated.
Put the selector switch in the on/
off position, unplug the appliance
and wait 30 minutes.
It is not possible to start the
mixing process.
The blender bowl or the lid is
not attached correctly.
Place the blender bowl on the
base with the handle facing to
the right or front or attach the lid
correctly.
The blender has been stopped
and the selector switch has
been moved with the lid open.
Put the selector switch in the on/
off position, press the power
button and then switch the appli-
ance back on.
Customer service
Please contact our customer service should you encounter any problems with your blender.
Detailed information on service, repairs, warranty and product registration can be found at
www.zwilling.com/service.
Fault / Customer Service / Disposal