Important!
Place the steel frame where the furniture is to stand and use a spirit level and the adjustable feet to ensure it is level.
Measure the four different positions as shown in the figure. Make sure the feet are unscrewed a few turns from the beginning to
allow you to adjust up or down. This stage is vital for ensuring the modules fit well. You can choose to do this later, but it is
significantly easier when the frame is not carrying any weight. Tip: Move the steel frame away from the wall a little once you
have adjusted to ensure a better location when fitting the modules.
Now put the module in place. One way of reducing the risk for scrapes on the sides of the modules is to loosen the six screws
to the lower frame a few turns. Keep the ends a little apart as demonstrated by the small arrows in the figure. Tighten the screws
from the underneath as soon as the module is in place. Lift the module into the steel frame and align the holes on the underside
in relation to the guide pins in the frame.
A5
A4
5
X 2
Summary of Contents for MOLTO
Page 1: ...MOL TO ASSEMBLY MANUAL ...
