6 Quick Setup Guide
Using Both Audio Inputs on the AccuVoice TV Speaker AV150
If you have your TV's optical digital output connected to the AV150’s optical
digital input, you could also use the AV150’s analog minijack input for a second
audio source. You can also connect an analog audio source to the MINIJACK
ANALOG input. This second source could be music from a portable audio
device, an audio disc in a player or the audio from a “music only” channel sent
to the AV150 from the analog audio output of a cable or satellite set top box.
To hear an audio source connected to the analog audio input on the ZVOX
AV150 TV Speaker, press the INPUT button on the TV Speaker remote control
until you see the GREEN light (the BLUE light is the digital input).
Connection Options
Placing The AccuVoice TV Speaker in Front of the TV.
Most people choose to place the ZVOX speaker in front of the TV. But it can also
be placed on any level surface near the TV – above, below or to the left or right.
Choose a place that lets you direct the ZVOX Speaker towards the TV viewers.
• A safe, secure installation of the AccuVoice TV Speaker is the
owner’s responsibility.
• Do not place any objects on top of the AccuVoice TV Speaker.
Placement Options
ZVOX Speaker Wall Mounting Information
The AV150 speaker has two M3 threaded sockets in the enclosure back.
Two 10mm length screws are provided for these sockets. With the correct
additional hardware, you can use these sockets to secure the ZVOX AV150
speaker to most flat surfaces, like a wall or shelf. Longer screws may be
necessary
NOTE:
It is the ZVOX AV150 owner’s responsibility to ensure the
any such mounting is safe and secure. Each of the two mounting sites should
be able to secure a five pound (3 KG) object.
Volume Up/Down
Volume Up blinks ORANGE.
Volume Down blinks YELLOW.
Power
The Power button switches the ZVOX
speaker between STANDBY and On.
Note:
The ZVOX AV150 will also enter
STANDBY if it receives no audio signal for
approximately 30 minutes. A command
from a remote control or a restored audio
signal will turn it back on.
Input Selection
Press the INPUT button on the ZVOX
remote to select between the speaker’s
two inputs (BLUE or GREEN lights).
The choices are:
Optical digital — BLUE
Analog minjack — GREEN
Mute
Press this button to mute the ZVOX speaker.
When MUTE function is active, the display
blinks the Volume lights. The AV150 will
enter Standby if it is left in MUTE for longer
than five minutes.
Button Functions on the
ZVOX Remote Control
Remote Control Button Layout.
TV to AV150 Audio Signal Cable Guide
The AV150 includes two analog signal cables and one optical digital signal
cable. One of these three cables will connect from most TVs or cable/
satellite set top boxes to the digital or analog input on the AV150. In the rare
instance your TV or cable/sat set top box has only an optical minijack audio
output, an optical miniplug to standard optical plug cable is needed (not
supplied with the AV150).
INPUT
SURROUND
POWER
MUTE
ACCUVOICE
VOLUME
OTHER
SETTINGS (PS)