22
Versión / Version 1; Ene 2017
6. MAINTENANCE
Lamp and fuse replacement
Note: make sure that the microscope is disconnected from the net before replacing any lamp
or fuse
4.
Replacement of the reflected light lamp (lamp box) (Figure 4):
Loosen the fastening screw (20) of the lamp box and open the cover, to expose the
lamp.
After replacing the lamp close the cover and tighten the fastening screw (20).
5.
Replacement of the transmitted light lamp (figure 5):
Slide the precondenser (26) framework out to expose the lamp.
After replacing the lamp put the precondenser framework in its original position.
Fig.4
Fig.5
Halogen bulb