ZUWA Impeller Pumps
22
9.5 Assembling the pump
Assembly of the pump is the reverse of disassembly
–
see previous chapter.
After completing pump assembly connect suction and pressure hose according to the
indication In/Out on the type plate
.
9.6 Mounting and dismounting of transmission for V-belt
drive
The transmission with 24 mm stainless steel
shaft for disc adaption can be used with pump
types 2001-A, 2001-B and 2001-C.
Pump with transmission is normally delivered
as a completly assembled unit.
Separating pump from transmission:
>
First untighten 2 setscrews, then the 4
screws on the pump.
>
Pull off pump from transmission.
For reassembly first tighten the 4 screws on
the pump, then the 2 setscrews.
The lateral discs and O-rings must lie precisely in the recesses to ensure
that the O-rings are not pinched.
setscrews
pump
transmission
