Standby Mode: The Gyroshoes will
enter Standby Mode when the
Gyroshoes are powered on and
parked on the ground.
Do not press the edge of the Gyroshoes while in Balance Mode if you are not riding it. Doing so could
force the Gyroshoes to move rapidly. It may lead to serious injuries for you or others.
WARNING
Rider must weigh between 22–220 lbs(10–100 kg).
Wear an approved helmet and other protective
gear to minimize any possible injury.
1. Vehicle Control Practice
a. Turn on one mainframe, put single foot on the middle
of the foot mat, then swing back and forth to feel the
control.
b. Switch to the other foot, then swing back and forth to
feel the control.
2. Get Ready
Ask a friend to assist you on your first ride. Go to a
large open area. Place both mainframes shoulder
width apart and put them into Balance Mode.
3. Stepping On
With assistance from your friend, put one foot on the
middle of the mainframe's foot mat. When comfortable,
stand straight and look straight ahead while stepping up
with your other foot. Try to avoid rocking back and forth.
Balance Mode: The Gyroshoes will
enter Balance Mode when they are
gently touched on the tilted end.
If the Gyroshoes do not detect a
rider within 3 minutes after
entering Balance Mode, the
Gyroshoes will be powered off
automatically.
There is no front or back of the Gyroshoes. You can
step on from either direction.
When the Gyroshoes are in Balance Mode, place
one foot on the middle of the mainframe's foot
mat. Give gentle pressure on the front end of the
foot mat, the Gyroshoes will go forward; give
gently pressure on the rear end of the footmat, it
will go backwards.
The Gyroshoes are very sensitive. Relax when
riding and keep your center of gravity steady.
If the Gyroshoes cannot enter Balance Mode
and beeps an alarm, try restarting them. If
the problem persists, please contact after-
sales service.
b.
a.
c.
*
Features
6. Learning to Ride
7
6
Do not press the edge of the ZUUM Shoes while in Balance Mode if you are not riding it. Doing so could
force the ZUUM Shoes to move rapidly. It may lead to serious injuries for you or others.
If the ZUUM Shoes cannot enter Balance Mode
and beeps an alarm, try restarting them. If
the problem persists, please contact after-
sales service.
Standby Mode: The ZUUM Shoes
will enter Standby Mode when
the ZUUM Shoes are powered on
and parked on the ground.
Balance Mode: The ZUUM Shoes
will enter Balance Mode when they
are gently touched on the tilted
end.
If the ZUUM Shoes do not detect
a rider within 3 minutes after
entering Balance Mode, the ZUUM
Shoes will be powered off
automatically.
There is no front or back of the ZUUM Shoes.
You can step on from either direction.
When the ZUUM Shoes are in Balance Mode,
place one foot on the middle mainframe’s foot
mat. Give gentle pressure on the front end of
the foot mat, the ZUUM Shoes will go forward;
give gentle pressure on the rear end of the foot
mat, it will go backwards.
The ZUUM Shoes are very sensitive. Relax when
riding and keep your center of gravity steady.
