8805 Jones Rd. Ste C104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com
ZM 082213
Shielded Cable:
On most installations, we recommended using a Shielded CAT5/6 cable with properly connected shielded
RJ45 connectors. This will prevent video and audio loss due to EMI and other interference from switched lighting and ceiling
fans.
Caution:
1. The wiring must be away from any equipment with electromagnetic signal, such as mobile phones, microwaves, radio
communication equipment, fluorescent lighting, and high voltage power lines.
2. This device is not network compatible; do not connect via Network to avoid damage.
IR Control Connections:
- Step 1: When using your IR remote pointed at the display side, plug the IR Receiver into the Receiver Extender.
Then on the source side, plug the IR Blaster into the Transmitter Extender.
- Step 2: When using your IR remote pointed at the source side or, plug the IR Receiver into the Transmitter
Extender. Then on the display side, plug the IR Blaster into the Receiver Extender.
Status Lights:
HDMI Output LED (Red) - ON: Video sync established from Receiver Extender to display
OFF: No sync or bad connection
HDMI Input LED (Blue) - ON: Video sync established from source to Transmitter Extender
OFF: No sync or bad connection
Panel View:
___________________________________________________________________________________