9
6
Check in the box near to “I accept the terms and conditions” and tap on the button
“next”.
How to become an ELD driver
1.
It is necessary to be a part of the fleet to become an ELD user. Select the “Connect to
carrier” option on the next screen to join the fleet.
2.
Click on «enter USDOT» input field and enter correct information.
3.
When USDOT is found click on «save» button.
4.
Request to join the fleet is sent over to the server, where the supervisor manually
confirms it. After the confirmation, you will become the ELD driver and receive access
to all ELD features.
Connect app with scanner
1
Turn on the Bluetooth on your smartphone.
2
Connect the device to the DLC.
3
Open the application.
4
Find the icon with the scanner in the upper right corner of the Logbook screen. The
icon is going to remain grey until the ELD scanner is connected.
5
Tap on the “Connect” button.
6
Choose the truck from the list or create a new one.
7
It will open up the pop-up “Choose scanner” with a list of the available devices within
your range.
8
Choose the device from the list.
9
Make sure that the device connected is the correct one. Otherwise, the selected truck
will not get connected accordingly.
10
Tap on the “Add” button to be connected to the selected or created truck. Press ‘Cancel”
to undo the action.
11
“Connecting” pop-up will open
It is going to take a few seconds for the scanner to connect…
12
After scanner is successfully connected, an ELD icon will turn green.
13
Tap on the icon again to choose and connect another scanner.
Summary of Contents for ZUHMBKBTV
Page 3: ...3 Quick Start ...
