FV772 - Rev. B 02/17/21
Page 3
Parts Checklist
1. Base cabinet assembly.
2. Fresh water feed hose line and drain hose.
3. Backsplash assembly including mounting hardware.
4. Handle assembly inbluding mounting hardware.
Assembly Instructions
1. To install: position slots on backsplash with the holes on the base and then carefully tighten mounting
hardware using a phillips head screwdriver.
2. Install handle using hardware provided.
Start-up
First time use of the Eco portable hand wash sink:
1. Open cabinet door.
2. Take stainless steel braided fill hose with garden hose end and route it through grommet hole in bottom of cabinet to
outside of cabinet.
3. A garden hose by others can be connected at this time. Fill only with cold tap water.
4. Take drain hose and route it through grommet hole in bottom of cabinet. A garden hose by others may be connected to
drain hose to run to floor drain location.
5. Activate sensor faucet to clear water lines of any trapped air.
6. Close cabinet door.
7. Unit is now ready to use.
Daily Operation
1. Open door.
2. Route drain hose and fresh water inlet hose outside cabinet through the grommet hole.
3. Hook up fresh water (cold only) garden hose connection.
4. Connect garden hose extension and route to proper drain system.
5. Close door.
Manual
paper towel
dispenser
Manual soap
dispenser
Large capacity
washbasin
prevents splashout
16 Gauge heavy-duty
stainless steel
Sensor faucet
Grab bar
Offset drain
prevents aerosolization
of pathogens
EZ Roll
locking casters
Optional:
•
CuVerro® antimicrobial
copper-nickel surface sink
