ZURN AquaSense ZER-TM Series Installation, Operation, Maintenance And Parts Manual Download Page 1 | Manualshive

Page: 1 / 16

background image

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA:

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT:

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Power Options:

Battery (Standard)

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of purchase.

Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in writing of such defect and the

goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly maintained and used in accordance with instructions. We shall

not be responsible for any labor charges or any loss, injury or damages whatsoever, including incidental or consequential damages. The sole and exclusive

remedy shall be limited to the replacement of the defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his

intended use and the purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability

is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a period of three years and

shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.

NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT

Water Closet Models:

ZER6000AV-ONE-TM 1.1 gpf

ZER6000AV-HET-TM 1.28 gpf

ZER6000AV-WS1-TM 1.6 gpf

ZER6000AV-DF-TM

1.1/1.6 gpf

Urinal Models:

ZER6003AV-ULF-TM 0.125 gpf

ZER6003AV-EWS-TM 0.5 gpf

ZER6003AV-WS1-TM 1.0 gpf

AquaSense

®

ZER-TM Series

Automatic Sensor-Operated Gear

Driven Type Flushometer for Water

Closets and Urinals

Installation, Operation, Maintenance

and Parts Manual

Compliance:

• ADA Compliant

• ASSE 1037/ASME A112.1037/CSA B125.37

• cUPC

• Texas Accessibility Standard (TAS)

• WaterSense Compliant

1
2
3
...
»

Summary of Contents for AquaSense ZER-TM Series

















Reviews:

No comments

Related manuals for AquaSense ZER-TM Series

Brand: Gardigo Pages: 9

Brand: 4pets Pages: 5

Crometta 85 Vario/Unica'Crometta Set...

Brand: Hans Grohe Pages: 16

Stamis S Showerpipe 240 1jet EcoSmart Varia...

Brand: Hans Grohe Pages: 40

Brand: Kohler Pages: 2

Quiessence 85521

Brand: Brizo Pages: 6

Universal Roof HKA11-12074

Brand: Petsafe Pages: 24

Brand: b-intense Pages: 30

Brand: Travis Perkins Pages: 8

LIFE LIF-123T-CP

Brand: VADO Pages: 6

Brand: Zip Water Pages: 16

Brand: Stern Engineering Pages: 9

Brand: Gessi Pages: 24

Brand: Ramon Soler Pages: 12

Brand: Moen Pages: 1

COLONY SOFT 4175.1

Brand: American Standard Pages: 3

Brand: Hans Grohe Pages: 44

Logis 160 CoolStart Eco

Brand: Hans Grohe Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands