manualshive.com logo in svg

Zundapp Z800, Operating Manual

Share
Download
Zundapp Z800 Operating Manual Download Page 58

Operating Manual – Mountain bike with electric motor / 250 W rated power 

 

 

 

05.08.2021     REV 1.1 

58 

 

 

Questions about guarantee and warranty 

 

Question 

Answer 

What can I do if I have 
problems with my bike? 

First of all, we recommend that you read the operating manual 
supplied with your bike carefully. 
If that does not solve your problem, please contact your dealer 
or our service staff. Please have your proof of purchase and 
your bike passport ready. The service and contact details can 
be found in this operating manual under: 24 Service and con-
tact on p. 71 

What support can I expect 
under guarantee? 

A detailed explanation of the guarantee and the statutory war-
ranty can be found in this operating manual under: 3 
Statutory warranty and warranty claims On p. 9 

Who do I contact in the 
event of a warranty or ser-
vice? 

The service and contact details can be found in this operating 
manual under: 24 Service and contact on p. 71 

 

 

Technical questions 

 

Question 

Answer 

Can I fit any tyres on my 
bike? 

No. The tyres and inner tubes must match the specifications of 
the wheel rim. 
Furthermore, in line with the enclosed declaration of conform-
ity, no modifications to the bike are permitted without the 
manufacturer's consent! 

Can I connect any trailer to 
my bike? 

No. The attachment of trailers is not intended for your bike. If 
you do attach a child’s seat, that will void the declarations of 
conformity supplied and all warranty claims. 

Can I install any child’s seat 
in my bike? 

No. The attachment of child’s seats is not intended for your 
bike. If you do attach a child’s seat, that will void the declara-
tions of conformity supplied and all warranty claims.

 

Can I install any bottle 
cage? 

If your bike has mounting bolts for a bottle cage, you can gen-
erally install any bottle cage. A few bike models do not have 
threads in the frame for installing a bottle cage. In this case it 
would be possible to install a bottle cage using a clamp mount. 
If in doubt, always consult the manufacturer first. 

 

 

 

Summary of Contents for Z800












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands