Zumtobel LUXMATE CIRIA, Instructions For Start-Up And Use

Page: 41 / 142

Configuring the LM-CIRIA control unit
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en 41
552 Assigning building service types
Path: SERVICE MENU / INTERNAL / CONFIGURATION / TOUCHRING TYPE
Figure 72: TOUCHRING TYPE settings level
– Start point: TOUCHRING TYPE settings level
1. Run your finger along the touchring until the desired building service type appears.
2. Select SAVE to save the setting.
= Building service type is assigned and saved.
= The previous selection level appears.
Building service type Building service type number
COMMON (all building services) 1
Brightness 2
Blind position 3
Slat angle 4
Screen 10
Colour temperature 13
Window 65
Curtain 64
Temperature 11
Air exchange 39
Table 6: Selection of TOUCHRING TYPE setting options
Parameter Value range Factory setting
SCENE 0 – 20 1
Table 4:
SCENE
setting options
Parameter Value range Factory setting
KEY PRESENCE SCENE,
LAST SCENE
PRESENCE SCENE
Table 5: KEY setting options
Notes
•
Settings are only saved if SAVE is selected.