Zumex Group S.A.
Tel. +34 961 301 251. Fax. +34 961 301 255. [email protected].
Zumex Service
Tel: +34 960 800 999.
www.zumex.com
Cleaning instructions for components
All the parts, with the exception of the cover and the tap,
can be put in a
dishwasher
to clean them.
Cleaning of the extraction area and any of its removable
parts must be done with a
sponge soaked in soapy water
suitable for food use. Do not use scouring sponges that
could scratch the surfaces.
It is necessary to sterilise the machine with a
disinfectant
product
after each cleaning.
Rinse with plenty of water
after sterilising, in order to
remove any remaining disinfectant.
Cleanliness and hygiene warnings
It is necessary to clean all parts that come into contact with the juice each day.
!
Blade, sub-filter, bin, peel guides, feed plate,
front cover, and tap
Pressing assembly
Daily cleaning
Clean the
blade
,
sub-filter
,
bin
, and
peel
guides
piece by piece with soapy water and
then rinse with clean water.
Remove the
side outputs
from the front
cover.
Clean the entire assembly with a sponge
and soap in a single piece under a tap. Move
the
juicing heads
around to make sure that
they are completely clean.
Clean the side outputs and the
central part
of the cover with a soft sponge to avoid da-
maging the material. Rinse with plenty of
water.
The assembly can also be washed in
a single piece in a
dishwasher
.
To
clean quickly
,
clean the Pressing Kit assembly
in a single piece under a tap or
in a dishwasher.
Clean the
feeding plate
with a soft sponge
to remove the remaining particles still stuck
to it.
Clean the whole
tap
by letting soapy water
run through the spout. Brush well at both
holes.
1
2
3
1
2
4
5
