ZUM Radio MMDVM-Pi, User Manual

Page: 15 / 22

Elite 3.5 LCD ZUMspot kit user guide
Copyright 2019-2022 ZUM Radio, Inc
15 Rev 1.0
Flashing MMDVM-Pi
Windows
● Turn on Raspberry Pi
● Open your preferred web browser (Chrome) and go to http://pi-star.local
○ NOTE: If http://pi-star.local does not work for you then you will have to connect
to Pi-Star via the IP Address (Ex. http://192.168.1.14 ). In order to find out what is
the IP address of your Raspberry Pi, see the section titled Find IP Address
● Go to Configuration->Expert->SSH Access
● Login to pi-star
● Run command rpi-rw
● Transfer binary from the previous section Building Firmware to the Raspberry Pi. Should
be under bin -> mmdvm_f7.bin .
○ You can use an app like WinSCP to transfer the file. You can download it from
https://winscp.net/eng/index.php
○ Open WinSCP
○ Under “Host name” you can enter http://pi-star.local or if in your case you
access Pi-Star via the IP address then that is what would go there.
○ Enter username which is pi-star
○ Enter password. If you haven’t changed it then it should be: raspberry
○ Press the “Login” button in order to connect to the Raspberry Pi