Zultys ZIP4x4, User Manual

Page: 86 / 194

76
ZIP4x4 User’s Manual
If you are accessing the phone book, and have used the search function to locate a name, number,
or address, then when you go off hook or select a call appearance, the phone calls that contact and
exits the menu function.
8.2.6 Dialling Using a SIP Address
8.2.6.1 Purpose
When you dial using a SIP address, you don’t need to know a person’s phone number. This is a
good method of making a call if the person’s address has been created logically. You can use any
of the schemes described in section 8.2.1 on page 73 or section 8.2.2 on page 74. If the phone is in
calculator mode see section 8.2.4 on page 75 for how to make the call.
A SIP address is normally written as:
SIP:name@domain
For example:
SIP:john.doe@zultys.com
With the ZIP4x4, you must not write “SIP:” because the phone will automatically insert that for
you. Also, when you call an address that is within the same domain as your phone, you do not
need to enter the domain name.
8.2.6.2 Entering an Address
To dial using a SIP address, you must take the phone out of calculator mode. See section 8.9.8 on
page 105 for details. It is easier to enter an address in this manner without first selecting a call
appearance or obtaining dial tone. When you have selected a call appearance, the phone times
out between you entering characters and sends the characters. This time-out might be too short
when creating an alphanumeric address.
To enter an alphanumeric address instead of a numeric address, press the Func key once. The
display shows Func:abc on the top row. The function key in this mode locks the use of the keys
so that you do not need to repeatedly press the Func key.
The digit keys 2 to 9 allow you to type the letters of the alphabet that are displayed on those keys.
When you press a key, it selects the first character. If you quickly press the key again, it selects the
second letter and so on. When you repeatedly press the key, the phone selects the next character
in sequence, then the number of the key, then it scrolls back to the first letter.
To scroll through the list of characters, press the key within 800 ms of the last press. If you take
longer than this, the cursor position moves to the right and when you next press the key you will
select the first letter in the list. If you want to select a character from the same key to be the next
character you enter, you can wait or you can press the right arrow on the volume key.
To select upper case characters instead of lower case characters, press the # key. The display
shows Func:ABC on the top row. To return to selecting lower case characters, press the # key
again. The arrow on that key reminds you the key is used to shift between upper and lower case
characters.
The maximum length of a SIP address is defined to be 256 characters. However, the ZIP4x4 will
allow you only to enter 64 characters. Once you reach that limit, the phone will not accept more
characters.