Zultys ZIP4x4, User Manual

Page: 85 / 194

8. Using the Phone
75
d. Press one of the call appearance buttons. The phone sends the digits and puts the phone
into speaker mode.
e. Press the # key. The phone selects the lowest numbered call appearance that is available,
sends the digits, and puts the phone into speaker mode. The phone does not play the
DTMF digit for the # key.
You can also dial directly from the phone book without a dial tone as described in section 8.7.3 on
page 96.
8.2.3 Sending a # as Part of the Number
When you are entering a number and you press the # key the phone interprets that as the end of
the number and sends the number to the switch without the #. If you need to send a # as part of
the string, press the Func key. The phone changes the top row of the display to show:
The keys now allow you to enter letters as well as numbers. This is more fully described in section
8.2.6 on page 76. Press the * key twice to display characters that you can select. Use the right arrow
on the volume key to highlight the # character, then press the * key again. Finally, press the Func
key so that the keys enter only numbers again.
8.2.4 Dialling When in Calculator Mode
You can keep the phone normally in calculator mode as described in section 8.9.9 on page 105 and
still be able to make and receive calls. When you want to make a call, you can do so with or
without a dial tone.
If you want to dial a SIP address, you must exit calculator mode first.
1. Do one of the following:
a. Lift the handset or press the Hook button.
b. Press one of the call appearance buttons that is not lit.
2. The phone exits calculator mode, reserves a call appearance, and provides dial tone.
3. Dial the number or address as described in section 8.2.1 on page 73.
When you terminate the call, the phone returns to calculator mode if there is no activity on any
of the call appearances (all LEDs on these buttons are off). When the phone resumes the calculator
mode, the phone displays the state of any calculation that you had started.
8.2.5 Making a Call While Accessing the Menu
If you are accessing the menu and want to make a call, you can do so only by getting dial tone
first. That is, you must go off hook or select a free call appearance as described in section 8.2.1 on
page 73. When the call terminates the phone resumes access to the menu exactly as it was prior
to the call. The phone automatically exits the menu function 60 s after the end of the call if you do
not press any keys or buttons.
1. Call Func:abc