Zultys ZIP4x4, User Manual

Page: 183 / 194

C. Configuration Files
173
C.4.5 Audio Information
Audio information parameters configure ring tone styles. Figure C-11 lists the Audio Information
configuration parameters.
Parameter Description
Description of
equivalent menu
command
codec Specifies speech encoding method. Valid settings are 0 and 1:
0 specifies
µ-law
1 specifies A-law (version 1.1 does not support A-law)
Default value is 0.
section 9.6.6 on
page 143
cust_ring2 Specifies the file that provides the call waiting tone when ring_tone2
is set to 4 (custom). File directory is specified by sound_url. Valid
setting is string that represents the file name.
Default value is NULL string.
section 9.5.5.1 on
page 125
distinctive_ring Specifies the use of different ring tones for internal and external
calls. Valid parameter settings are ‘yes’ and ‘no’ as follows:
yes - internal and external calls use different ring tones as specified
by int_ring_tone and ext_ring_tone, respectively.
no - all calls use internal ring tone setting as specified by
int_ring_tone.
Default value is yes.
section 9.6.6 on
page 143
ext_cust_ring Specifies the file that provides external ring tone when
ext_ring_tone is set to 4 (custom). File directory is specified by
sound_url. Valid setting is string that represents the name of the file.
Default value is NULL string.
section 9.5.5.1 on
page 125
ext_ring_tone Specifies the ring tone for calls received from phones outside of the
enterprise. Valid settings range from 0 to 4 as follows:
0 - ring pause
1 - ring ring
2 - short ring
3 - bell bell
4 - sound defined by custom file (see ext_cust_ring)
Default value is 0.
section 9.5.5 on
page 122
hold_tone This tone is played once every 30 seconds when you have a call that
is on hold. Valid settings range from 0 to 3 as follows:
0 - off
1 - beep
2 - bleep
Default value is 0.
section 9.5.5 on
page 122
int_cust_ring Specifies the file that provides internal ring tone when int_ring_tone
is set to 4 (custom). File directory is specified by sound_url. Valid
setting is string that represents the name of the file.
Default value is NULL string.
section 9.5.5.1 on
page 125
Figure C-11 Audio Information Configuration Parameters