Zultys ZIP4x4, User Manual

Page: 119 / 194

9. The Menu
109
The phone looks at the contact’s name to find a match. If you have not entered a name for
the contact, the phone displays the address (SIP URI or number). The SIP URIs are sorted
within the alphabetical list. Numbers are at the end of the list.
5. If the contact is not the one you wanted:
a. Use the Up and Down buttons or the Up and Down keys to scroll through the list of
names.
b. Press the keys again to select the first letter for a different contact.
6. To dial a contact, press the Enter button, press a call appearance button, or go off hook.
The phone exits the menu function.
7. To exit the search function, press the Esc button.
1
9.2.2 Add New Contact
To add a new contact to the phone book, do the following:
1. Select Menu | Phone Book | Add new contact.
2. The display shows:
The phone automatically places the keypad in character mode and shows Func:abc on the
top row.
3. Type the name of the contact using the character mode as described in section 8.2.6 on page
76. The maximum length of the name can be 19 characters. After you have typed the 19th
character the cursor remains on the last character. If you try to add more characters, the
phone plays the DTMF digit for the # key and replaces the last character in the string with
the last typed character.
4. Press the Enter button.
You can press the Enter button without entering a name for the contact.
5. The display shows:
Enter a name or number for the contact.
2
1. Even though Func:abc is active, if you press the Esc button, the phone does not interpret this as if you are trying to dial
memory location number two (M02).
Name Func:abc
}
Address
}
2. The phone prompts you for an
address
to indicate that either a name or a SIP URI is acceptable.