52
ZIP2 User’s Manual
Backup Server Port.
This parameter configures the transport protocol port number for the backup
SIP server. The default port for both TCP and UDP transports is 5060, which is the value
recommended by the SIP specification.
Send Registration to Backup Server.
When this option is selected, the phone sends a Registration
Request to the backup SIP Server when the primary server is bypassed, then once every 1800
seconds.
A.2.5.2
Gateway Settings
Enter the following gateway settings as follows:
Dial Plan:
x.T|x.#|*x.T|*x.#. For more information, refer to appendix, starting on page 85.
Transport:
The ZIP2 supports UDP and TCP.
Phone Number:
This data entry box is not supported.
CallerID Name:
This is the Caller ID text that is sent by the ZIP2 as the Caller ID banner. This
Caller ID banner is the SIP display name that is placed in the From header.
Port:
This is the transport protocol port; normally set to 5060.
AEC On:
Acoustic Echo Cancellation; this parameter must always be set to ON.
Figure A-5
SIP Configuration panel
Summary of Contents for ZIP2
