Zultys BPS12, Hardware Manual

Page: 19 / 44

15
C h a p t e r 4
Hardware Description
4.1 Introduction
This chapter describes the BPS12 hardware and the status indicators located on the device.
4.2 Panel Descriptions
4.2.1 Front Side of the BPS12
The front side of the BPS12, shown in figure 4-1, displays the BPS12 label on the right side of the
panel and features three LEDs in the upper left corner. This side contains no wiring connectors.
The numbers in the figure correspond to the following descriptions:
1. Power LED – See section 4.3.1 on page 17 for a description of the Power LED.
2. Load LED – See section 4.3.2 on page 17 for a description of the Load LED.
3. Status LED – See section 4.3.3 on page 18 for a description of the Status LED.
Figure 4-1 Front Side of BPS12
BPS12
Battery Power Supply
1
2
3