www.zuhne.com
VENTUS 30 Kitchen Range Hood
8
INSTALLATION PROCEDURE
5. Put the chimney on the hood, use two screws (4x8mm)to
fix the chimney to the slidery duct fixing support.
6. Use the other two screws (4x8mm) to fix the bottom of chimney.
7. After adjusting the position, open the filter and fix the
body inside with safety screws.
MAINTENANCE
Proper maintenance of the Range Hood will
assure proper performance of the unit.
Filters
The filters must be cleaned approximately once
every 30 hours of operation (when the central
Screw
segment on the display goes on or starts blinking).
Use a warm detergent solution. Grease filters are
dishwasher safe.
Remove filter by pushing filter towards the back of
hood and rotating filter downward.
