9 User settings
After a power failure
After a power failure, the time must be set before the appliance can
be operated normally again.
–
The sensor button is illuminated in white.
–
flashes in the digital display.
▸ Set the time and confirm.
Time display
With the «Visible» setting (factory setting), the time is dimmed between 00:00
and 06:00 (24-hour format) and 12:00 a.m. and 06:00 a.m. (12-hour format).
With the «Invisible» setting, the time is never displayed.
To reduce power consumption to a minimum, select «Invisible» in the
user settings. Despite automatic energy-saving stand-by, all safety fea-
tures are active.
9.6
Illumination
There are 3 possible settings:
A
«With appliance
door»
The illumination is switched on when the appliance
door is opened and switched off when the appli-
ance door is closed.
B
«With appliance
door and during
operation»
The illumination is switched on during operation
and when the appliance door is opened.
The illumination switches off automatically 3
minutes after the end of an operating mode or the
last time the door is opened.
C
«No illumination»
The illumination is always switched off.
9.7
Acoustic signal
The acoustic signal can either be switched on or off.
An acoustic signal is emitted when there is a fault or when the appli-
ance is switched off – even if the setting is set to «Off» (safety func-
tion).
9.8
Temperature unit
The temperature can be displayed in «°C» or «°F».
▪
°C:
Degrees Celsius
▪
°F:
Degrees Fahrenheit
43
Summary of Contents for Miwell MWHSL60
Page 1: ...Operating instructions Miwell HSL Microwave...
Page 54: ...54 Notes...
