11 Trouble-shooting
Cancelling alarm
▸ Touch any button.
▸ Resolve problem, see Trouble-shooting.
When the Sabbath mode is activated, there are no visual warning signals.
11
Trouble-shooting
This section lists faults that can be solved simply by following the instructions given. If
the fault cannot be remedied, please contact Customer Services. Before contacting Cus-
tomer Services:
▸ please note down the serial number (SN), which is shown on the identification plate,
as well as
▸ the sequence of events that led to the fault.
Malfunction
Possible cause
Solution
Appliance is not
working.
▪
An interruption in the power
supply.
▸ Check the power supply.
▸ Change the fuse.
▸ Reset the automatic circuit
breaker.
▪
The fuse or circuit breaker
keeps blowing.
▸ Contact Customer Services.
▪
Appliance is faulty.
▸ Contact Customer Services.
Illumination is not
working.
▪
LED light bulb is defective. ▸ Replace the LED light bulb.
Illumination is flash-
ing
▪
Appliance door has been
standing open for more
than 2 minutes.
▪
Appliance door was not
closed properly.
▸ Close the appliance door.
Malfunction
Possible cause
Solution
Error display
▪
Various situations can lead
to an «F» message.
▸ Contact Customer Services.
Error display
▪
Temperature sensor in the
refrigerator compartment is
defective.
▸ Contact Customer Services.
–
The appliance enters the emer-
gency mode. The refrigerator
compartment is cooled at the
same output level as before
the temperature sensor mal-
function.
21
