Spider
manual Instruction
Thank you for purchasing ZTW Spider Series Brushless Electronic Speed Controller (ESC). Spider
series ESCs are especially designed to meeting the demand of ever popular multi-rotors, and has been
improved and bettered base on the various feedback from the market given the compatibility with some
new design motor on the market. With better quality and competitive price, Spider will be your best
choice for your multirotors.
Connecting your ESC:
•
Connect your controller with motor wires.
•
Solder appropriate connectors to the battery wires.
•
Insulate all solder connectors with heat shrink tubes.
•
Connect ESC signal cable according to your own flight control instruction.
•
Red and Black wires from ESC should connect to battery pack Red and Black wires respectively.
Features:
•
Use new generation of the MOSFETs to make sure the ESC low heating and high reliability .
•
Supports high RPM motors
，
can be matched with most of the motors in the RC market .
•
Capable of using BLHELI and Simonk firmware.
•
Capable of ONESHOT feature to work better with your flight controllers.
•
Super smooth and accurate throttle linearity.
Specifications:
fig 2
fig 1
Flight
Control
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
M4
M5
M6
M8
M7
M3
M2
M1
1
2
3
4
5
6
7
8
R
X
E
S
C
1
2
3
4
5
6
7
8
Note: In order to provide better power supply to external equipment, we add extra 12v for new
Spider 50A OPTO 12V and Spider 60A OPTO 12V. Longer one is signal cable to receiver or FC,
and short one is BEC 12V output
1. Power on your radio and push your throttle stick to 100%.(see fig 1)
2. Then connect battery to your ESC, you will hear “W V” from motor to confirm the end point
after three seconds.
3. Pull throttle stick back to 0%, you will hear two “
” from motor confirm the lowest end point.
- - —
4. Throttle calibration is done. Please recycle your battery to use ESC.
•
Super fast Refresh Rate up to 600Hz.
V4.0
Throttle Calibration:
When you use the ESC for the first time, we would like to suggest you calibrate your throttle end point
of your radio system. This will make the throttle response better. Please see following steps of how-to:
Spider 20A OPTO
Type
Spider 30A OPTO
Spider 40A OPTO
Spider 30A OPTO Small
Spider 12A OPTO
Spider 40A OPTO Small
5020301
PN#Model
5030301
5040301
5030311
5012301
5040311
20A\30A
23
25*43*9
NO
Cont./Burst
Battery cell
Weight
Size(mm)
User
W*L*H
(g)
NXX\Lipo
Current(A)
NO
30A\40A
25
27*52*10
NO
40A\50A
33
NO
48
20*47*8
NO
30A\40A
20
NO
12A\20A
5-12NC\2-4Lipo
8
15*26*6
NO
40A\50A
31
NO
Program
Spider Lite 18A OPTO
Spider 20A OPTO Small
5018301
5020311
5.3
23
20A\30A
5050311
Spider 50A OPTO 12V
60A\70A
5060311
50A\60A
NO
50
30*55*13
NO
18A\30A
5-12NC\2-4Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
5-18NC\2-6Lipo
Spider 60A OPTO 12V
12*22*4.3
25*43*9
30*55*13
20*47*8
20*47*10
201000010
NO
2.1
Z-Link
30*12*6
18
300200010
UBEC 6A
45*23*10
NO
5-18NC\2-6Lipo
6A\10A
51
300300010
UBEC 12A
60*34*15
NO
8-60NC\3-14Lipo
12A\18A
7
300100010
UBEC 3A
30*13*6
NO
5-18NC\2-6Lipo
3A\5A
ADD: 2/F, Block 1, Guanfeng Industrial Park, The Second Industrial Estate,
Jiuwei New Village, Xixiang, Baoan, Shenzhen, China, 518126
