Hardware Development Guide of Module Product
9
All Rights reserved, No Spreading abroad without Permission of ZTEWelink
(c) Lay ZM8620 and its heat dissipating chip out on the active heat dissipating channel of
the main board. Place ZM8620 on the side with a relatively lower temperature.
(d) Do not place ZM8620 near components with relatively heat a large generation, such as
CPU, and south bridge.
4 Pin Description
4.1
Dimensions and Interface
4.1.1 Definition of PIN I/O Parameters
The definition of ZM8620 I/O parameter is as shown in Table 4-1.
Table 4-1 PIN Parameters
PIN Attribute
Description
AI
Analog signal input
AO
Analog signal output
B
bidirectional digital with CMOS
input
DI
Digital signal input
DO
Digital signal output
Z
High-resistance output
P1
PIN group 1, the power supply
voltage is VDD_P1
P2
PIN group 2, the power supply
voltage is VDD_P2
PU
PIN internal pull-up
PD
PIN internal pull-down
4.1.2 PIN Configuration Diagram
The PIN sequence of interfaces on ZM8620 is following the mini-PCIE interface and defined as
shown in Figure 4-1.
Summary of Contents for ZM8620
Page 8: ......
