ZXV10 ET301 User Guide
Steps
1.
Connect an
video source device (for example, PC) to the
HDMI IN
of a terminal.
2.
Send dual stream in either of the following ways.
To...
Do...
Send dual streams by
pressing keys on the remote
control
Press the
Content
key. Click
Send
in the dialog box that is
displayed, and press the
OK
key.
Send dual streams in the
conference control window
a.
Press any
Direction
key on the remote control to open the
Conference Control
window, see
.
b.
Click
, and then press
OK
on the remote control.
c.
Select the desired device, and then press
OK
on the remote
control.
d.
Click
Send Dual Video
, and then press
OK
on the remote
control.
Figure 5-4 Conference Control Window
3.
After two streams are successfully sent, each terminal can change the screen layout
to view a combination of local, remote, and secondary videos.
For details about how to change the screen layout, refer to
5.7 Changing the Layout of a Screen
You can change the layout of a screen to view a combination of local, remote, and
secondary videos (for example, full-screen, picture-in-picture, and picture-by-picture).
5-10
SJ-20190419091840-001|2019-04-08 (R1.0)
ZTE Proprietary and Confidential
