ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
346
Confidential and Proprietary Information of ZTE CORPORATION
E
ND OF STEPS
MSDP Extended Configuration
This topic describes how to configure MSDP in an extended way
Router CLI (Privileged Mode) has been accessed.
1. To add illustrative description to MSDP neighbors, use
ip
msdp description
<peer-address> <desc-text> command
in global configuration mode as shown in Table 402.
T
A B L E
4 0 2
I
P
M
S D P
D
E S C R I P T I O N
C
O M M A N D
Command Format Command Mode Command Function
ip msdp
description
<peer-address>
<desc-text>
Global
configuration
This adds illustrative
description to MSDP
neighbors
Result:
This adds illustrative description to MSDP neighbors.
Note
: Mesh Group consists of MSDP speakers, where every
two of them are connected by the MDSP. When the SA
packet of the MSDP neighbor from the same Mesh Group is
received, it will not be forwarded to the other MSDP
neighbors of the same Mesh Group.
2. To take the IP address of a designated interface as the RP
address of the SA message, use
ip msdp originator-id
<interface-name> command in global configuration mode as
shown in Table 403.
T
A B L E
4 0 3
I
P
M
S D P
O
R I G I N A T O R
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip msdp
originator-
id
<interface-
name>
Global
configuration
This takes the IP address of a
designated interface as the RP
address of the SA message
Result:
This takes the IP address of a designated interface
as the
RP address of the SA message.
3. To limit the number of SA messages from the designated
MSDP neighbor in the SA cache table, use
ip msdp sa-limit
<peer-address> <sa-limit> command in global configuration
mode as shown in Table 404.
Purpose
Prerequisites
Steps