Chapter 4 IPv6 ACL Configuration
Tip:
If the IPv6-MIXED-ACL is bound on the VLAN, and the bound VLAN is inconsistent with
the out-vlan in the rule, the bound VLAN is used as the out-vlan.
4.3 IPv6 mixed-ACL Maintenance and Diagnosis
IPv6 ACL Maintenance and Diagnosis
To maintain and diagnose IPv6 ACLs, use the following commands.
Command
Function
ZXR10(config)#
show ipv6-access-lists
[{
name
<
a
cl-name
>[{
from
<
value
>|
to
<
value
>}]|[
brief
[
name
<
acl-name
>]|[
config
]}[|{
begin
|
exclude
|
include
}]
Shows the IPv6 ACL list or brief
information.
ZXR10(config)#
show ipv6-access-groups
[{
by-access-list
<
acl-name
>|
by-direction
{
ingress
|
egress
}|
by-interface-or-vlan
<
interface-name or vlan- id
>
by-interface
<
interface-name
>}]
Shows the IPv6 ACL binding
information. The information can
be selectively displayed according
to the command parameters.
ZXR10(config)#
show running-config ipv6-acl
Shows the entire IPv6 ACL
information.
ZXR10(config)#
show running-config port-acl
Shows all the IPv6 ACL binding
information (and the IPv4 ACL
binding information as well if any
IPv4 ACL is bound).
ZXR10(config)#
show running-config-interface port-acl
[<
interface-name
>]
Shows the IPv6 ACL binding
information related to a certain
interface (and the IPv4 ACL
binding information as well if any
IPv4 ACL is bound).
The command parameters are described as follows.
Command
Function
<
acl-name
>
Shows IPv6 ACL information by the specified ACL name.
ingress/egress
Shows ACL information by the ingress or egress.
<
interface-name
>
Shows ACL information by the interface name.
[<
interface-name
>]
Shows the ACL (IPv4 and IPv6) binding information related
to a certain interface.
4-7
SJ-20150114102049-011|2015-01-15 (R1.0)
ZTE Proprietary and Confidential
