Zte ZXHN H3600 Page 82 Maintenance Management Manual Download

Page: 82 / 100

ZXHN H3600 Maintenance Management Guide

Table 7-3 Parameter Descriptions for the Echo Cancellation

Parameter

Description

Echo Cancellation

Whether to disable the echo cancellation feature.

3. Click

Apply

button to apply the changes.

7.4 Configure the SIP Protocol

This procedure describes how to configure the SIP Protocol.

Steps

1. On the main page of the ZXHN H3600 device, select

VoIP > SIP Protocol

to the

SIP

Protocol

page, see

Figure 7-5

Figure 7-5 SIP Protocol Page

2. Set the parameters.

Table 7-4

describes the SIP protocol parameters.

Table 7-4 Description of the SIP Protocol Parameters

Parameter

Description

Local Port

Local port that the SIP protocol uses, default: 5060.

Primary Proxy Server

IP address of the active SIP proxy server that the ISP provides, which
must be the same as that configured on the SIP server.

Primary Outbound Proxy
Server

IP address of the active outbound proxy server that the ISP provides,
which must be the same as that configured on the SIP server.

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands