5 Configure the Internet
2. Set the parameters.
lists the QoS traffic shaping parameters.
Table 5-7 QoS Traffic Shaping parameters
Parameter
Description
On/Off
Click
On
to enable the traffic shaping function.
Click
Off
to disable the traffic shaping function.
Name
New QoS traffic shaping name.
Interface
Select an interface from the drop-down list.
Rate
Committed access rate. Range: 0,8192 – 1000000000.
The shaping rate value of 0 indicates no speed limit.
3. Click
Apply
button to apply the changes.
5.4 Configure the Security
5.4.1 Configure the Firewall Level
The section describes how to configure firewall level.
Steps
Configure the Firewall
1. On the main page of the ZXHN H3600, select
Internet > Security > Firewall
to the
Firewall
page, see
.
Figure 5-14 Firewall Page
2. Set the parameters. For a description of the parameters, refer to
.
SJ-20201203151144-003 | 2021-06-16(R1.0)
31
Summary of Contents for ZXHN H3600
Page 6: ...IV ...