Zte ZXHN H3600 Maintenance Management Manual Download

Page: 32 / 100

ZXHN H3600 Maintenance Management Guide

Figure 5-9 3G Connection Status

5.3 Configure the QoS

5.3.1 Configure the QoS Global Parameters

This page provides the function of

QoS

switch and other global parameters configura-

tion. Packets that match no classification rules will be processed according to the default
policy showed in this page.

Steps

1. On the main page of the ZXHN H3600, select

Internet > QoS > QoS Global Config-

uration

to the

QoS Global Configuration

page, see

Figure 5-10

Figure 5-10 QoS Global Configuration page

2. Set radiobox

to enable QoS function.

3. Click

Apply

button to apply the changes.

5.3.2 Configure the QoS Classification

This page provides the parameters of QoS classification configuration features.

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands