Zte ZXHN H3600 Maintenance Management Manual Download

Page: 25 / 100

5 Configure the Internet

Figure 5-3 Mobile Network

2. Click

Refresh

to refresh the information.

Check the 3G Connection Status

1. On the main page of the ZXHN H3600, select

Internet > Status > 3G > 3G Connec-

tion Status

to go to the

3G Connection Status

page, see

Figure 5-4

Figure 5-4 3G Connection Status

2. Click

Refresh

to refresh the information.

5.2 Configure the WAN

5.2.1 Configure the Ethernet Connection

This procedure describes how to configure the Ethernet on the network side, so that
user services can be connected to the external network.
The ZXHN H3600 supports route-based and bridge-based WAN connections.



Routing connection



Bridge-based connection

SJ-20201203151144-003 | 2021-06-16(R1.0)

Summary of Contents for ZXHN H3600





































































































Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands

Zte ZXHN H3600, Maintenance Management Manual

Search results

Summary of Contents for ZXHN H3600

Reviews:

Related manuals for ZXHN H3600

Brands by name

Popular brands