ZXHN H3600 Maintenance Management Guide
3. Double-click
Internet Protocol (TCP/IP)
. The
Internet Protocol (TCP/IP) Proper-
ties
dialog box is displayed. Set the IP address to
192.168.1.200
, subnet mask to
255.255.255.0
, and default gateway to
192.168.1.1
.
4. Click
OK
.
Postrequisite
After the IP address of the computer is set, you can run the
Ping
command to ping the
IP address 192.168.1.1. If the ping operation is successful, it indicates that the TCP/IP
configuration is correct and the computer is properly connected to the ZXHN H3600.
3.2 Login
The ZXHN H3600 provides a Web-based configuration and management system. You
can enter a specified IP address in the address bar of Internet explorer to access the
system.
Prerequisite
A computer is directly connected to the LAN port of ZXHN H3600, and their IP address-
es are in the same network segment.
Steps
1. Open Internet explorer, and enter
http://192.168.1.1
(default maintenance IP address
of the ZXHN H3600) in the address field. Press the
Enter
key. The login page is dis-
Figure 3-1 Login Page
14
SJ-20201203151144-003 | 2021-06-16(R1.0)
Summary of Contents for ZXHN H3600
Page 6: ...IV ...
