Zte ZXHN H2640, Maintenance Management Manual

Page: 50 / 116

ZXHN H2640 Maintenance Management Guide(TIM)
4-24 SJ-20200714160642-002 | 2020-07-27(R1.0)
Parameter Description
Egress Specify the data traffic direction. The Ingress option and
egress option cannot be the same.

If the ingress is LAN, the egress should be a WAN or 3G
connection. The data traffic direction is upstream.

If the ingress is a WAN or 3G connection, the egress
should be the LAN. The data traffic direction is
downstream.
DSCP A DSCP is specified for the TOS byte in the IP header of each
packet to indicate the priority. Range: 0
–63.
10. Click Apply button to apply the changes.
4.4.3 Configure the Local Service Control
The section describes how to configure local service control.
Configuring the Service Control-IPv4
1. On the main page of the ZXHN H2640, select Internet > Security > Local Service
Control to the Local Service Control page.
2. Click Service Control-IPv4 to open Service Control-IPv4 page, see Figure 4-20 .
Figure 4-20 Service Control-IPv4 Page
3. Configure the service control-IPv4 parameters.
Table 4-11 lists the local service control-IPv4 parameters.
Steps
Abstract