ZXHN H168N Maintenance Management Manual
6.5 Configuring FTP
The section describes how to configurate
FTP
provides the parameters of
configuration features.
Prerequisite
Before configuring
application, make sure a
storage device is connected to the
ZXHN H168N device.
Steps
1.
On the main page of the ZXHN H168N, select
Local Network > FTP
to go to the
FTP
page.
The page as shown in
Figure 6-24 FTP
2.
Select
On
to enable FTP Server, and specify other parameters.
3.
Click
Apply
button to apply the changes.
– End of Steps –
6.6 UPnP
This page provides the parameters of
configuration features.
Steps
1.
On the main page of the ZXHN H168N, select
Local Network > UPnP
to go to the
UPnP
page.
The page as shown in
6-22
SJ-20140220172310-002|2014-03-03 (R1.0)
ZTE Proprietary and Confidential
