Zte ZXHN H168M User Manual Download Page 6

Please contact the vendor immediately should there be any incorrect, missing or damaged compo-

nents. Try to keep the package and existing components of the product in the case that the product

needs to be replaced.

Product Features

Technical Features

Support for 4 x 10/100 Mbps Ethernet ports.

Support for GUI (graphic user interface) network configuration.

Support for the DHCP server function so that a DHCP server can be configured in the network.

Compatibility with all Internet standard applications and functions.

Support for standard and compatible DSL interfaces.

Support for virtual server, IP address filter and DMZ isolation area functions.

Support for system function configuration in Web pages.

Support for software upgrade by downloading.

Support for four types of DSL uplink: ADSL, ADSL2, ADSL2 + ADSL Bonding and VDSL + VDSL

Bonding.

Support for sessions of three equivalent route modes (PPPoE, IPoE and StaticIP), each of which

supports up to 8 sessions.

Support for RIPv1 version, RIPv2 version and NAT protocol.

Support for WLAN (wireless local area network) IEEE802.11b, 802.11g and 802.11n protocols.

Interfaces

H168M interfaces and buttons are described in the following table.

Table 1 Interface and Button Description

Interface / Button

Description

POWER

Power jack, DC 12 V

LAN1–LAN4

RJ-45 LAN port, connected to the local network by the RJ-45 network cable

DSL

RJ-14 DSL interface

On/Off

Power button

RESET

Reset button. Press the hole with a needle for at least 5 seconds when the

device is powered on to reset the device to ex-factory default values

4

Summary of Contents for ZXHN H168M














Reviews: