Interface/Button Description
WLAN
After pushing the button, the WLAN function will be
enabled or disabled.
WPS
After pushing the button, the WPS function will be
enabled.
Rear panel
Figure 3-3 shows the interfaces and buttons on the back panel of the ZXHN
H167A.
Figure 3-3 The Back Panel
Interface/Button Description
On/Off
Power switch, to power on or power off the device.
Power
Power supply port, It is connected to the power
adapter.
Reset
During power ON period, hold on this button for more
than 5 seconds to reset the current settings to the
factory default setting, and then the system restarts
automatically.
LAN1–LAN4
RJ-45 port. It is used to connect the modem to
computer, STBs or other network devices.
DSL
RJ-11 port, it is used to connect the VDSL2, or ADSL2+
uplink access network.
