17
Parameter
Description
WPA/WPA2-PSK: It is a hybrid authentication mode.
Passphrase WPA
Range: 8 ~ 64 characters
Encryption Algorithm WPA
There are three options:
TKIP:Temporal Key Integrity Protocol
AES: Advanced Encryption Standard
TKIP+AES: Adaptive encryption algorithm
WEP Encryption
Enable
/
Disable
WEP Encryption.
WEP Encryption Level
The value can be
64bit
or
128bit
.
WEP Key Index
The WEP authentication provides four keys.
WEP Key
Use 5 ASCII characters or 10 hexadecimal digits to specify
the WEP value for the 64 bit WEP encryption.
Use 13 ASCII characters or 26 hexadecimal digits to specify
the WEP value for the 128 bit WEP encryption.
4. Click
Next
to open the
User Configuration
page, as show in
Figure 5 User Configuration
describes the parameters for User configuration.
Table 5 User Configuration
Parameter
Description
Old Password
Input the old password of
admin
.
New Password
Specify the new password.
Confirmed Password
Confirm the new password.
5. Click
Next
, then click
Finish
to finish quick setup.
