Chapter 6 - Access Management
Confidential and Proprietary Information of ZTE CORPORATION
43
Parameter
Description
Interface
Select the interface to be modified. PV0~PV7 and WAN interfaces.
Direction
Select which direction of data flow to apply to the filters.
IP Filter Rule
Index
Select IP filter rule index to be modified.
Active
Toggle this rule index ON or OF with
Yes
or
No
.
Source
IP
Address
Enter the source IP address to deny access to the ZXHN H108L
router.
Subnet Mask
Enter the subnet mask of the source IP address.
Port Number
Enter the port number of the source IP address.
0
means that all
ports are allowed.
Destination IP
Address
Enter the destination IP address to deny access to the ZXHN
H108L router.
Subnet Mask
Enter the subnet mask of the destination IP address.
Port Number
Enter the port number of the destination IP address.
0
means that
all ports are allowed.
Protocol
Select the protocol to filter.
Rule Unmatched Select what happens to the data in question if the rule currently
editing is unmatched.
Next
means that the data is then compared
to the next IP filter rule.
Forward
means that the data will be
allowed into the user system.
Click
SAVE
to submit the changes, or
DELETE
to delete the rule
with the parameters, or
CANCEL
to exit without saving.
UPnP Management
Universal Plug and Play (UPnP) is an open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between
devices. An UPnP device can dynamically join a network, obtain an
IP address, convey its capabilities and learn about other devices on
the network. A device can leave a network smoothly and
automatically when it is no longer in use.
