Z431 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 3
phone battery.
1. Open the USB port cover.
2. Insert the charger’s USB adapter into the USB port.
3. Plug the charger into a standard AC wall outlet.
4.When the battery is fully charged, unplug the charger and disconnect it from the phone.
Notes:
•
The phone automatically switches off if the battery power is too low.
•
Make sure the charger’s connector is inserted correctly. Do not force the connector into the port.
•
The battery will remain fully charged for 3 to 4 hours.
•
Only use the charger provided by the original provider. Using an unapproved charger might be
dangerous and violate the authorization and warranty rules of the phone.
•
If the phone is used too often when the battery is low or not used for a long time, the screen may not
display the charge indicator until the battery has been continuously charged for 10 to 40 minutes.
•
To get the maximum
performance out of your battery, it is recommended that you completely charge
the battery before using the phone for the first time. A new battery’s full performance is only reached after
three complete charge and discharge cycles have been finished.
•
Charging is
only possible within a temperature range of 32
°
F to 113
°
F.
Powering Phone On/Off
Notes:
•
Do not turn your phone on in areas in which wireless phone use is not permitted, or when it could
cause interference or danger.
Hold the
Power/End Key
to turn your phone on or off.
Tips:
•
When prompted,
enter your PIN (Personal Identification Number) code or handset code and press the
OK Key
.
•
The PIN code
is the password
provided by your network service provider. You cannot use the SIM
card without it.
•
When the PIN code or
handset code is accepted, the phone automatically searches for the network.
After a few seconds, your phone displays idle mode.
