Zte Z291DL User Manual Download Page 45 | Manualshive

Page: 45 / 51

Zte Z291DL User Manual Download Page 45

CTIA REQUIREMENTS

• Do not disassemble or open, crush, bend or deform, puncture, or shred the

battery.

• Do not modify or remanufacture, attempt to insert foreign objects into

the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.

• Only use the battery for the system for which it is specified.
• Only use the battery with a charging system that has been qualified

with the system per CTIA Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.

• Do not short circuit a battery or allow metallic conductive objects to contact

battery terminals.

• Replace the battery only with another battery that has been qualified

with the system per this standard, IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage or other hazard. Only
authorized service providers shall replace the battery. (If the battery is non-
user replaceable).

FOR YOUR SAFETY

44

«
...
43
44
45
46
47
...
»

Summary of Contents for Z291DL




















































Reviews:

No comments