Confidential and Proprietary Information of ZTE CORPORATION 4
C h a p t e r
4
Installation
1. Charge the battery
z
Connect the desk charger and external AC socket via power adapter.
z
Put the phone on the desk charger. The charge spring of the desk charger should be inserted in
the apertures at the bottom of the phone.
z
Meanwhile, power indicator in the upper-right corner of the display blinks, indicating the
charging is in progress. While charging in power-off mode, the display only shows the charge
indicator. If the battery is completely flat, it may take a while before the charge indicator appears
on the display.
z
When the power indicator on the screen stops blinking, the charging is completed. The normal
charging time is 4 hours. In the process of charging, it is a normal phenomenon that the battery,
phone and charger get hot.
z
After the completion of charging, disconnect the charger from the phone and AC socket.
Note
：
When charging the battery, place the phone in an environment with good ventilation and
temperature between 0
℃～＋
45
℃
. Make sure to use the charger offered by the phone
manufacturer. Using unauthorized charger may cause danger and violate the guarantee articles.
When the phone is automatically switched off or indicates power shortage, charge the battery in
time.
The standby time and the talk time of the phone are based on ideal working environment. In
practice, the working time of battery varies with network condition, working environment and
application methods.
2.
★
UIM Card
z
Power off the phone and remove other external power.
z
Take off the back cover and remove the battery of the phone.
z
Insert UIM card into UIM card slot in the phone or pull out UIM card out of slot.
z
Direct the back cover towards the locking catches on the both sides of the phone and push the
back cover of the phone upward to lock the cover into its place.
