13
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
Troubleshooting
If ZTE WP832 appears following phenomenon in the process of application, please
read following relative information at first. If the problems still can not be solved,
please contact with the distributor or service provider.
Problem Check
Point
No Dial Tone when off-hook.
Hook on and hook off receiver again.
No corresponding response from
the interface of keypad system
(After several attempts).
Power off and then power on again.
Incorrect display of system time.
Check whether the system signal is too weak.
No display on screen when
disconnect external power
supply.
Check whether the battery has electricity, or it
is damaged; or power on the phone again.
Press CALL/REDIAL key, but no
number is sent.
Check whether you have hooked off (Notice:
Be sure to hook off before sending the
number when making a call.)
There is incoming call, but no
prompt ring tone is heard.
Please check the mute mode and the volume
of ring tone.
There is no prompt tone when the
alarm clock has reached the time.
Please check whether the alarm clock is
enabled or not.
Certain call cannot be received.
Check whether the number is restricted in
incoming list.
Cannot send short message.
Please check the network condition.
