Zte WP658, User Manual

Page: 17 / 24

17
3. SIM card
f) Switch the phone off.
g) Open the bottom cover of the battery.
h) Remove
the battery.
i) Slide the SIM card into the SIM card slot. Make sure that the contact area of the
card is facing down, and the beveled corner matches with the SIM card slot.
j) Put in the battery and install the bottom cover.
How to Power on/off the phone
1. To power on the phone, connect phone and external power outlet with the power
adapter and then hold Exit key for about three seconds.
2. To power off the phone, at standby mode, hold the Exit key till the phone is
powered off.
Notes:
It is strongly recommended to connect the phone to external power outlet, and use
internal battery to power your phone only when external power fails or is not available.
The phone will charge the internal battery automatically when it is connected to
external power outlet.
How to Make a Call
There are two methods for making a call.
1. The first method:
c) Pick up the handset or press the
HANDS-FREE
key.
d) Enter the phone number, wait for several seconds to send the call automatically
or press
CALL/REDIAL
key to make the call.
Select recipient’s number from
Phonebook
, or press
CALL/REDIAL
key to
select a number from the recent calls list, then press
CALL/REDIAL
key to make
the call.
2. The second method:
In standby mode, enter the number or select recipient’s number from
Phonebook
,
or press
CALL/REDIAL
key to select a number from the recent calls list, then
press
CALL/REDIAL
key to make the call.
Notes:
Add the international prefix, country code and area code (without the leading 0) before
the number when making an international call.
Voice Mail
Before using voice mail, please contact service provider to confirm that the voicemail
has been activated.
The system automatically sends a message to your phone to inform you that there is a
new voice mail. Read the message and then dial voice mailbox number to listen to
your voice mail.
To read or send your voice mail quickly, you set the voice mailbox number
first. Pick
up the handset or press
HANDS-FREE
key, and then hold “
1”
key to dial voice
mailbox number. In standby mode, you can also hold “
1”
key directly to dial voice
mailbox number.