WF824 Getting Started
Confidential and Proprietary Information of ZTE CORPORATION 10
Limited Warranty
•
This warranty does not apply to defects or errors in the Product caused by:
i.
Reasonable abrasion.
ii.
End User’s failure to follow ZTE’s installation, operation or maintenance instructions or
procedures.
iii.
End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage,
servicing or operation of the Product.
iv.
Modifications or repairs not made by ZTE or a ZTE-certified individual.
v.
Power failures, surges, fire, flood, accidents, actions of third parties or other events outside
ZTE’s reasonable control.
vi.
Usage of third-party device, or usage in conjunction with third-party products provided that
such defects are due to the combined usage.
vii.
Any other cause beyond the range of normal usage intended for the Product.
End User shall have no right to reject or return the Product, or receive a refund for the Product from
ZTE under the above-mentioned situations.
•
This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming
items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited
to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise
required under the mandatory provisions of the law.
Limitation of Liability
•
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using of this product, whether or not ZTE had
been advised, knew or should have known of the possibility of such damages, including, but not
limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product,
or any downtime cost.
FAQ and Troubleshooting
Problem
Suggested Solution
My PC cannot connect to
the CPE.
•
Re-plug the PC Ethernet cable and check if the PC LAN connection
is up or showing activity.
•
Check if the PoE power adapter LED is on. If it is not, check the
power cord and make sure it is connected properly. Also verify that
the AC power supply is available.
•
If the PC LAN shows no activity and PoE adapter LED is off but
the power cord and ETH cable are connected properly and there is
AC supply, then it is likely the PoE adapter is damaged. Please
